1. What Are SSBR and ESBR?
Styrene-Butadiene Rubber (SBR) is a synthetic rubber widely used in tire manufacturing and other rubber products. Based on the polymerization process, SBR is mainly divided into two types: Solution Styrene-Butadiene Rubber (SSBR) and Emulsion Styrene-Butadiene Rubber (ESBR).
Although both contain styrene and butadiene units, their production processes result in differences in molecular structure, microstructure, and performance.
2. SSBR vs. ESBR: Key Performance Differences
The performance of SSBR and ESBR depends not only on the polymer itself but also on the filler system, formulation, and processing conditions. The following data compare the two rubbers in silica-filled and carbon-black-filled compounds.
2.1 Mechanical Properties
The table below presents the mechanical properties of the four tested formulations.
| Vulcanizate Property | SSBR + Silica | ESBR + Silica | SSBR + Carbon Black | ESBR + Carbon Black |
| Hardness (Shore A) | 67 | 68 | 72 | 73 |
| 100% Modulus (MPa) | 2.2 | 1.7 | 2.7 | 2.5 |
| 300% Modulus (MPa) | 14.6 | 10.1 | 10.5 | 11.2 |
| Tensile Strength (MPa) | 28.2 | 18.4 | 19.5 | 22.2 |
| Elongation at Break (%) | 494 | 478 | 683 | 584 |
| Permanent Deformation (%) | 14 | 16 | 12 | 16 |
| Tear Strength (kN/m) | 56 | 51 | 58 | 55 |
Note: Results are derived from specific experimental formulations and should not be regarded as universal specifications for commercial grades.
Key observations from the mechanical testing:
These findings demonstrate that the mechanical performance of SBR is closely tied to the filler system, and neither rubber type universally outperforms the other in every property.
2.2 Dynamic Mechanical Properties
Dynamic mechanical properties are important for evaluating the behavior of rubber compounds under repeated deformation. Tan δ is commonly used as an indicator when assessing tire-related properties: values at around 0°C are often associated with wet-grip behavior, while values around 60°C are commonly used to evaluate hysteresis related to rolling resistance.
| Property | SSBR + Silica | ESBR + Silica | SSBR + Carbon Black | ESBR + Carbon Black |
| Tan δ at 0°C | 0.282 | 0.275 | 0.350 | 0.360 |
| Tan δ at 60°C | 0.141 | 0.138 | 0.276 | 0.288 |
| Wet Skid Factor | 0.56 | 0.47 | 0.44 | 0.44 |
Key observations from dynamic testing:
These results highlight that dynamic performance is heavily influenced by polymer-filler interactions, proving that polymer type alone cannot dictate final compound behavior.
3. How to Choose Between SSBR and ESBR?
SSBR and ESBR serve different formulation requirements. The appropriate choice depends on the target properties, filler system, processing conditions, and overall production costs.
SSBR may be considered when:
ESBR may be considered when:
Website: www.elephchem.com
whatsapp: (+)86 13851435272
E-mail: admin@elephchem.com